Flying Circus Engine Builder

Ohara Engineworks

Return to Aircraft Builder

Engine Builder

Warning: It is very easy to produce overpowered engines with this builder.
We suggest sticking to replicating real engines where possible.

Here is a guide on how to use the builder: Engine Builder Guide

Input Values	Upgrades	Engine Stats
NameEraEngine TypeEngine Displacement (L)Compression Ratio (N:1)Cylinders per RowNumber of RowsRPM BoostMaterial Fudge FactorQuality Fudge Factor	Compressor TypeCompressor CountMinimum Ideal AltitudeWar Emergency PowerFuel InjectorDiesel	NamePowerMassDragReliabilityRequired CoolingOverspeedFuel ConsumptionAltitudeTorqueCostOil TankGeared RPM Default Name013-20910-2900No6

Pulsejet Builder

Input Values	Engine Stats
Desired PowerEngine TypeEraQualityStarter	NamePowerMassDragReliabilityFuel ConsumptionRumbleCostAltitudeDesign Cost Pulsejet PV-1 (Pioneer)1130401293

Turbine Builder

Input Values	Description	Engine Stats
NameEraTypeEngine Diameter (m)Overall Pressure RatioBypass RatioMass Flow AdjustmentAfterburner	Engine Parameters: Thrust = 8.48 kN Fuel Consumption = 35.63 g/(kN*s) For a real engine, set the era, total engine diameter (not intake) and OPR. Then adjust the mass flow rate until the Thrust is just below the rated takeoff thrust. For a fictional engine, it is not suggested to adjust the mass flow rate.	NamePowerMassDragReliabilityFuel ConsumptionCostAltitude Default9517306010759

Electric Engine Builder

Input Values	Engine Stats
NameEraWindingDesired PowerChonkQuality	NamePowerMassDragReliabilityCharge DrawOverspeedCost Default1030-5201

List Management

Engine Values	Management
NamePowerMassDragReliabilityCoolingOverspeedFuel ConsumptionAltitudeTorqueRumbleCostOil TankPulsejetTurbocharger	Lists Engines Save Engine List Load Engine List Add From Engine Builder Add From Pulsejet Builder Add From Turbine Builder Delete Engine Create List Delete List Save Engine List as CSV

Return to Aircraft Builder